Bay Door latches source for new ones - Luxury Coach Lifestyles
Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
Reply
 
Thread Tools Display Modes
 
Old 09-22-2009, 05:17 AM   #1
encantotom
Senior Member
 
encantotom's Avatar
 
Join Date: Mar 2007
Location: mesa, az
Posts: 1,375
Default Bay Door latches source for new ones

hi all,

a few of us want to get some replacement latches for the bay doors. does anyone have a source for them? i am told newell doesnt have them anymore.

or if any of you know the manufacturer and or part number.

here is a picture of one of them.

thanks

tom
Attached Thumbnails
Click image for larger version

Name:	engine door after.jpg
Views:	98
Size:	97.0 KB
ID:	414  
__________________

__________________
2002 45'8" Coach
2008 Honda CRV toad

https://www.newellclassic.com/forum/album.php?albumid=8
encantotom is offline   Reply With Quote
Old 09-22-2009, 06:13 AM   #2
fulltiming
Senior Member
 
fulltiming's Avatar
 
Join Date: Feb 2006
Location: Texas
Posts: 1,558
Default

Last one I got came from Newell. The receipt that I think included the lock indicated it was a Hansen 3-point Lock #2103-S and it was $68.50 over 3 years ago.
__________________

__________________
Michael and Georgia Day
1992 Newell 43.5' #281
8V92 DDEC-2, HT740
PT Cruiser GT with Remco Transmission Pump
https://newellowner.com/newell-photos/
fulltiming is offline   Reply With Quote
Old 09-22-2009, 12:42 PM   #3
fulltiming
Senior Member
 
fulltiming's Avatar
 
Join Date: Feb 2006
Location: Texas
Posts: 1,558
Default

Here is a listing for the 2103-S http://mooreindhardware.thomasnet.co...nid=&appid=124
__________________
Michael and Georgia Day
1992 Newell 43.5' #281
8V92 DDEC-2, HT740
PT Cruiser GT with Remco Transmission Pump
https://newellowner.com/newell-photos/
fulltiming is offline   Reply With Quote
Old 09-26-2009, 02:57 PM   #4
prairieschooner
Senior Member
 
prairieschooner's Avatar
 
Join Date: Jun 2009
Location: Idyllwild, CA
Posts: 1,340
Default

One of these locks was very stiff on our '82. While we were at Doheney State Beach I took it apart and was able to repair it.
The assembly was removed from the bay door and put on the table and then disassembled setting the parts as they came off (you use a camera to help with reassembly). The matting surfaces were galling so they were cleaned off by scraping with a knife and then "polished" with a wire brush.The spring portion was distorted so it was re-formed using the end of a Crescent Wrench as an Anvil and a Ball Peen Hammer to lightly reform it. The parts were then reassembled with a small amount of lube on the mating surfaces.
The Lock works like new now and the others will be scheduled for similar attention.
__________________
have Coach will Travel
Steve & Tricia
1982 Newell 38' (built before #1) 6V92 DD, 5 Speed Allison, 12.5 KW Kohler, Couch used to make into a Bed but I fixed it!
https://newellshowcase.com/thumbnails.php?album=214
2007 Yukon, 1981 CJ7 Laredo, 2002 Honda CRV, 1955 Thunderbird, 1952 Pontiac Sedan Delivery, 1952 Ford 8N, 1958 Airstream, 1959 Glasspar 16' Avalon, Cabin in the Woods........what will I work on next
[SIGPIC][/SIGPIC]
prairieschooner is offline   Reply With Quote
Old 09-26-2009, 05:01 PM   #5
Wally Arntzen
Senior Member
 
Join Date: Apr 2007
Location: Minnesota
Posts: 326
Default

I contacted the site that Michael mentioned and was able to get the locks and slides on the back of them for less than $10.00 each. I should have them monday and it sure is a better way than repalcing the entire latch. I will report on the results.
__________________
Wally and Phyllis
1988 Newell Coach #163
40' with tag 8V92
Wally Arntzen is offline   Reply With Quote
Old 06-26-2012, 12:30 PM   #6
MrE
Senior Member
 
MrE's Avatar
 
Join Date: May 2012
Location: Boise Idaho
Posts: 719
Default

I spent quite some time on the phone with Moore Industrial Hardware coming up with the correct part numbers so I thought it might be nice to update this thread with that information.
Moore Industrial Hardware www.mooreindhardware.co
1-888-MOORE-IH
CDRX-1250-HD
key cylinder less slide bar, key 1250 with housing $7.32
223293 short slide bar $1.50
__________________

MrE is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by Newell Coach Corporation or any of its affiliates. This is an independent, unofficial site.


All times are GMT. The time now is 07:11 AM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
×