Electrical problems
hi all,
this morning i went out and caulked the passenger side windows and when i was done went inside and saw that the 120v power was off. it was blowing the house circuit breaker. i had heard arcing in the transfer switch panel before and it was on my list to investigate. guess that was today.
in one of the bays was a new auto transfer switch that was left from the previous owner so they must have anticipated problems.
power worked with the generator but not with the house power.
so, i changed out the transfer switch. that fixed the power not staying on and blowing breakers but now the xantrex prosine 3.0 inverter charger has a hard fault and says error 195, total system shutdown.
the error code says it might be a result of a short that burned out traces on the control board for the prosine or might be something else and to call xantrex. i called a local xantrex repair center and they said they cannot repair the 3.0 and it has to be sent back to xantrex. in addition, they dont make a 12v version anymore, only a 24v.
so, think i found a used one for 1400, new ones are not 12v. online you cant find alot of good to say about xantrex saying they dont help much.
i will call them on monday to see if there is a way to reset the error or check for it. i suspect the short in the transfer switch caused a problem with the inverter charger.
while i was doing it, the compartment was rusty and yukky so i sanded it down, primered and repainted it, polished the stainless panel on the front.
now i just have to figure out the inverter.
gee, i wonder if anything else can go wrong...
pictures of the compartment after being redone below.
if anyone has any wisdom on the inverter charger, let me know.
tom
|
Threaded Mode
