|
12-03-2011, 09:20 PM
|
#1
|
Senior Member
Join Date: Mar 2007
Location: mesa, az
Posts: 1,375
|
12v fuse for 12v air compressor
hi all,
for those of you that have a 12v compressor, do you have any idea where the fuse for it is? my compressor blows fuses (according to the doumentation) and i have a new compressor to put in but i have no power at the compressor. so the fuse is blown and i have not found it yet. there is no 12v fuse labled air compressor anywhere that i have found and russ says his is not obvious either.
any wisdom?
tom
__________________
|
|
|
12-03-2011, 11:05 PM
|
#2
|
Senior Member
Join Date: Feb 2010
Posts: 433
|
Tom,
The fuse is located on my coach in the 5th basement bay back on the driver's side. Inside the door about 18", mounted high on the front wall, is a fuse block that is covered by an approx 12" X 8" cover that is velcroed in place.
Happy hunting.......................
__________________
__________________
Steve
Newell
|
|
|
12-04-2011, 08:53 PM
|
#3
|
Member
Join Date: Oct 2011
Location: fulltime from Tulsa
Posts: 28
|
Thanks Steve for the info.
Thanks Steve for the info on the location of that bank of fuses. I hadn't located those yet. Now I have what may be a dumb question. Is it safe to assume if I find something with a fuse on it it will be 12V and anything that is 110V is on a breaker. I'm looking for a problem on my 110v water pump it won't come on, the 12V works fine, but it would be nice if I had both working.
|
|
|
12-04-2011, 09:02 PM
|
#4
|
Senior Member
Join Date: Mar 2007
Location: mesa, az
Posts: 1,375
|
my 110v water pump (headhunter) wasnt working when i got my coach. it is powered by the inverter on mine so the breaker was in the panel next to the inverter. i checked the power with a meter at the pump and it was ok.
by the way, there are a lot of self resetting 12v circuit breakers on our rigs. they are different than the fuses, but reset themselves. i keep a few spares of those too. the 110v breakers will all be in a cb panel or a subpanel and look like traditional house circuit breakers.
i am in the process of replumbing it to fit a mach5. the old one was a jetpaq headhunter. the connections are different.
since they used compressed ring pex fittings, i am using the sharkbite pex fittings so i can easily remove them if i need to ever get this pump out. they are quite pricey but easy to use and remove and reuse.
i will post how i get it done when i complete it.
i am off to my usual trip to asia tomorrow so work on the rig will come to a standstill for a few weeks till christmas vacation. (other than ordering stuff to be waiting for me when i get home).
bob, if you want to call me please do. i am around the rest of the day. i will pm you my phone number. i can help you troubleshoot the water pump if you want.
tom
|
|
|
12-04-2011, 09:17 PM
|
#5
|
Member
Join Date: Oct 2011
Location: fulltime from Tulsa
Posts: 28
|
Thanks Tom
I would love to have your phone number
|
|
|
12-04-2011, 09:59 PM
|
#6
|
Senior Member
Join Date: Sep 2008
Location: Thibodaux, LA
Posts: 1,221
|
Hey Tom, when I changed out my water heater I was able to buy some braided stainless hoses with sharkbite fittings attached. Really made the process easier. I keep spare sharkbite fittings in the coach just in case. Yes they are not cheap but the cost of a good pex ring crimper is pretty expensive and takes some skill to get them right so I figured sharkbite would be better.
|
|
|
12-04-2011, 11:55 PM
|
#7
|
Senior Member
Join Date: Mar 2007
Location: mesa, az
Posts: 1,375
|
hi forest, i considered them but the one run that is long enough to use one is the inlet pipe and it has enough suction that it would collapse a hose. so it has to be rigid plumbing. the inlet is just a few inches long each with t's and elbows.
even my plumber friends say the sharkbite or equivalent is high quality stuff.
but it quite expensive at 10-14 bucks a fitting.
thanks
tom
__________________
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|