Progressive Dynamics 9280 - Luxury Coach Lifestyles
Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
Reply
 
Thread Tools Display Modes
 
Old 10-21-2009, 01:45 PM   #1
jmacstack
Senior Member
 
Join Date: Apr 2009
Location: Missoula, Montana and Montpelier, VT
Posts: 100
Default Progressive Dynamics 9280

I just received my 9280. After looking at the narrow bay that it will go in to replace the boiler, the task feels a bit daunting. I have to change the electrical receptacle because mine doesn't accept the 9280's blade configuration. That's easy. My breakers are all 20 amp so I should be fine just changing the receptacle. The part that seems the hardest is the giant junction box right in front of the current charger as well as the shore power cord rack which are all in the way. I'm wondering from those who have stood in these shoes, did you have to remove the cord rack to gain better access to the bay? I am assuming that the only wire I have to add is an additional ground wire. I am planning on removing the old battery charger and putting the 9280 in its place. Any advice would be very helpful. I will try to post some pics of the current set-up. Thanks Again, Jennifer
Attached Thumbnails
Click image for larger version

Name:	P1000245.jpg
Views:	95
Size:	92.8 KB
ID:	493   Click image for larger version

Name:	P1000244.jpg
Views:	93
Size:	92.3 KB
ID:	494   Click image for larger version

Name:	P1000243.jpg
Views:	92
Size:	89.1 KB
ID:	495  
__________________

__________________
[SIGPIC][/SIGPIC]Jennifer Stackpole
1987 Newell, 40ft #143
DD 8V92 Silver
2010 Cannondale Tandem
No Name Tandem Mtn Bike
1973 Triumph GT6
2012 AWD 4-door Mini-Cooper
3 Ford Trucks
Just another fanatical motorhead
jmacstack is offline   Reply With Quote
Old 10-21-2009, 02:30 PM   #2
chockwald
Senior Member
 
chockwald's Avatar
 
Join Date: Feb 2008
Location: Riverside, California
Posts: 1,543
Default

Jennifer, thanks for the pictures.....they really are worth several thousand words. That being said, this is a very tight space with a lot of stuff in the way. I was blessed with a pretty roomy area to work in, had no power cord rack in the way, and no junction box, and it was still difficult. No doubt you will need to remove the cord rack, and the old boiler is probably pretty heavy, so you might have to remove the junction box just to pull it out. That may give you enough room....I'm not sure most of us guys, except maybe Richard, could maneuver in that tight space. Does the "hot" (red) wire go into that junction box, or into that little black box next to the electrical outlet? You are right on the extra gound wire. I had to replace my outlet, too, to accomadate the blade configeration of the power cord.
__________________

__________________
Clarke and Elaine Hockwald - FULLTIMING!
https://whatnewell.blogspot.com
1982 Newell 36’ DD 6V92 TA
2002 Thunderbird Retro
Cannondale Tandem
Cannondale Bad Boy
Cannondale F600
2 Terra Trike Tadpoles
Intense 5.5 mountain bike
ALBUM: https://newellshowcase.com/thumbnails.php?album=213
chockwald is offline   Reply With Quote
Old 10-21-2009, 06:22 PM   #3
encantotom
Senior Member
 
encantotom's Avatar
 
Join Date: Mar 2007
Location: mesa, az
Posts: 1,375
Default

some partial advice. the square box you are calling the junction box is actually the transfer switch that is controlled by the switches up at the drivers area that say shore, generator. the 3 position switch.

it has the main shore and gennerator power coming into it and i have totally redone mine inside with new relays, switches and neon indicator lights. i would recommend NOT removing it as it would be way more work to undo and reconnect with a very high chance of causing some problems. if you open it up and look inside you will see what i mean.

if you have to have the room, you might consider taking out the cord reel, but i have not done that since my setup is very different. i am one who without much concern will take things apart. having said that, sometimes it causes more work than the discomfort of just working around it.

i have the schematics for the transfer switch along with part numbers posted here on the site here http://www.newellclassic.com/forum/s...ransfer+switch

i have just noticed the pictures are not showing up and i am havng problems with my web site, so will fix that when i can. i can email the pictures if you need them let me know.
__________________
2002 45'8" Coach
2008 Honda CRV toad

https://www.newellclassic.com/forum/album.php?albumid=8
encantotom is offline   Reply With Quote
Old 10-21-2009, 11:18 PM   #4
Richard and Rhonda
Senior Member
 
Richard and Rhonda's Avatar
 
Join Date: Oct 2007
Location: Huntington WV
Posts: 1,041
Default

Hi Jen,

I replaced a boiler in the exact same config you have for an owner here in Fort Worth. First take off the cord reel, it will give you more room than you imagine. Second, I think you will find the boiler is either just sitting on a piece of plywood or bolted to a piece that will come out. Unplug the boiler and get it out as far as you can and then you will have more working room to unwire it.

Toughie will be putting the inverter back in the same space if it's foot print is larger than the bottom of the bay. If it is you will have to mount in on the side of the bay, I would cut a piece of plywood slightly bigger and mount the inverter to it, use a boatload of industrial velcro on the plywood and the bay wall, wire it up and stick the plywood to the wall. Voila.
__________________
Richard Rhonda Ty and Alex Entrekin
1995 Newell # 390 DD Series 60, Allison World Trans
Subaru Outback toad
CoMotion Tandem
Often wrong, but seldom in doubt
Rhonda's chronicle https://wersquared.wordpress.com/
Richard and Rhonda is offline   Reply With Quote
Old 10-22-2009, 03:18 AM   #5
prairieschooner
Senior Member
 
prairieschooner's Avatar
 
Join Date: Jun 2009
Location: Idyllwild, CA
Posts: 1,340
Default

Ok, the Box houses the Relays that allow you to switch from Shore to Generator from the Driver's Seat, a very valuable feature! This allows you to turn on the AC Generator and then Switch to the Generator Source and run the Air Conditioners while Traveling down the road.
Think about installing the Battery Charger closer to the Batteries. The 9280 looks to have an 80 Amp Output, look at this Chart;
http://www.westmarine.com/webapp/wcs...arine-Wire.htm you will see how large a Cable you will need to supply the 80 Amps the distance away from the Batteries (From the Batteries to the Source and then back to the Batteries 35' away = 70'). If you choose a 10% Voltage drop then the 13.6 Volts that you are paying for turns into 12.24 Volts under load (13.6 - 10%)
This would allow you to use a smaller Battery Cable in order to keep the Voltage Drop to a minimum.
The HEART Power Inverter/Charger on our '82 is mounted at the forward Bay and just above the House Batteries. The Size of our Cables keep our Voltage Drop to the 3% Range, much more desirable to me.
__________________
have Coach will Travel
Steve & Tricia
1982 Newell 38' (built before #1) 6V92 DD, 5 Speed Allison, 12.5 KW Kohler, Couch used to make into a Bed but I fixed it!
https://newellshowcase.com/thumbnails.php?album=214
2007 Yukon, 1981 CJ7 Laredo, 2002 Honda CRV, 1955 Thunderbird, 1952 Pontiac Sedan Delivery, 1952 Ford 8N, 1958 Airstream, 1959 Glasspar 16' Avalon, Cabin in the Woods........what will I work on next
[SIGPIC][/SIGPIC]
prairieschooner is offline   Reply With Quote
Old 11-14-2009, 02:22 PM   #6
jmacstack
Senior Member
 
Join Date: Apr 2009
Location: Missoula, Montana and Montpelier, VT
Posts: 100
Default

I have installed my new Progressive Dynamics battery charger and all is working well. Good thing I'm small because working in that space was a bit cramped. There was a hole cut in the floor under the old charger so I covered that with a piece of aluminum, caulked and screwed it to the floor. Thanks for the advice. Jennifer
__________________

__________________
[SIGPIC][/SIGPIC]Jennifer Stackpole
1987 Newell, 40ft #143
DD 8V92 Silver
2010 Cannondale Tandem
No Name Tandem Mtn Bike
1973 Triumph GT6
2012 AWD 4-door Mini-Cooper
3 Ford Trucks
Just another fanatical motorhead
jmacstack is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by Newell Coach Corporation or any of its affiliates. This is an independent, unofficial site.


All times are GMT. The time now is 05:29 AM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
×