You can also clamp (use a wood between the clamp and the material for protection) a very true straight edge to the material like angle aluminum and run your router using a solid surface bit. The material can also be cut using a quality saw with a high tooth count diamond blade. Always use solid surface bits when routing any solid surface material whatever the brand is.
There are many tricks of this trade. My father-in-law was a big time solid surface, granite and marble fabricator/manufacturer in Las Vegas.
Ken
__________________
__________________
Ken
Previous Owner of 3 Newell's
Wanted: Newell Coach Needing Engine Replacement!
If you want to sell, PM or Private Message me. Thanks!
"I know I’m not perfect, and I don't live to be. But before you start pointing fingers, make sure your hands are clean."
-Bob Marley
|