DIY Diesel Fuel Tank Cleaning - Luxury Coach Lifestyles
Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
Reply
 
Thread Tools Display Modes
 
Old 04-14-2013, 06:55 PM   #1
Viva Las Vegas JDR
Senior Member
 
Viva Las Vegas JDR's Avatar
 
Join Date: Aug 2010
Location: Las Vegas, NV
Posts: 118
Default DIY Diesel Fuel Tank Cleaning

I am looking for DIY suggestions for cleaning out my diesel fuel tank? My thoughts are pressure washing it unless there is another method I can use.

JDR
__________________

__________________
Jimmy Dean Ross
1988 Newell Coach
Viva Las Vegas JDR is offline   Reply With Quote
Old 04-14-2013, 08:48 PM   #2
NewellCrazy
Senior Member
 
NewellCrazy's Avatar
 
Join Date: Sep 2006
Location: Sugarland, TX or Salida,CO
Posts: 1,867
Default

Here's a great article on DIY fuel tank cleaning.

Link is at the bottom,

Sean




PS tested additives for their ability to prevent biological growth.



It’s usually this time of year that fuel contamination rears its ugly head, clogging filters right when we need our engine most. We’ve published several articles on preventing and coping with contaminated diesel fuel—ranging from additives, to fuel-polishing systems, to professional fuel-polishing services—but for some people, none of those remedies will fix the problem, and the only recourse is a thorough tank cleaning. Depending on the size of your fuel tanks, having a professional clean your tank and dispose of the dirty fuel can cost more than $1,000. But, for the careful, competent do-it-yourselfer, there is another option. For those sailors whose tanks have reached the contamination point-of-no-return, here’s a helpful article on DIY tank cleaning that accompanied our July 2009 test of diesel biocides.


There’s no getting around it; once filters begin clogging repeatedly, no additive or treatment applied to the tank will make the solids go away. The only realistic path to a clean tank is manual cleaning. It is commonly assumed this is a job for professionals, or a job that is extremely messy or dirty; that need not be true. Every tank is different; the resources and capabilities of each would-be do-it-yourselfer are different, but the following list of precautions and general guidance should keep you safe and minimize the mess and pain.


Burn the fuel down first. While it is certainly possible to pump all of the fuel out of the tank, a lot of pumping and hauling will be involved. Just like putting off going to the doctor, don't wait until the problem is fatal. Take your medicine early, burn the fuel out, and clean the tank.


Access. Hopefully the tank is fitted with a sufficient access opening. Although it is certainly possible to add a larger opening to a tank, the safety precautions involved are beyond the scope of this article and a professional should be engaged. Do not simply cut into an empty tank with a saber saw—the heat from cutting can generate enough fumes cause a fire or explosion. Additionally, the access hole must be sealed in a manner compliant with the appropriate code. It may be possible to clean the tank through the existing openings with some ingenuity.


Pumping. Although diesel fuel is not a flammable liquid, flammable mist can be generated by excessive agitation. The use of a shop vacuum is dangerous and has been linked to several fires. The safest pump is a manual bilge diaphragm pump, and most common brands are equipped with nitrile and neoprene elastomers that are compatible with diesel fuel; logically, since fuel and oil in the bilge is not unheard of. Head pumps are also so equipped. Any electrical pump should not be located in a confined space where vapors can accumulate.


Overflows. Be certain a person is stationed at each end of the pumping operation, and that one of these people can stop the pumping. It's surprisingly easy to lose track of time and overflow the receiving container. If siphon is possible, have a ready means to stop this.


Solvents. Some have suggested wiping down the inside of the tank with solvents in order to remove the last bit of residue. Clearly, this can be an extremely dangerous practice because of the flammable atmosphere the hazardous breathing atmosphere that can be generated. If you plan to wipe down the inside of the tank, a rag moistened with diesel fuel is the safe choice. An aqueous degreaser such Simple Green may also be useful, but it will be necessary to remove all cleaning residue.
Power washing. In many tanks, baffles or limited access openings will make it impossible to reach all portions of the tank. The professional tank cleaner’s solution is to use a power washer. The accessible portions of the tank will be washed down using an ordinary fan tip, though the end of the lance may be bent somewhat to improve access to the tank roof.


To reach more remote portions of baffled tanks, a tank cleaning nozzle capable of spraying in all directions is used. Several varieties of tank-washing nozzles are available from suppliers such as McMaster Carr. Though only rated at 100 pounds per square inch (psi), a typical power washer does not have the flow to produce over 40 psi pressure. One of the leading manufacturers of tank cleaning nozzles is Lechler, who offer a variety of designs to suit narrow openings.


The nozzle is attached to the end of a short piece of pipe (1-foot by ½-inch schedule 40 steel is typical); this is critically important to provide stiffness and to prevent the hose from turning back on itself and coming back out of the tank access hole, much like a snake crawling back up the arm of the handler. This stinger is attached to the length of flexible hose (3-10 feet of the same hose that the power washer lance is fed with), which is then attached to the tip of the power-washing lance in place of the usual nozzle. This extension is fed through the baffles in the diesel tank and will reach all areas. The tank cleaning nozzle/stinger is fed by hand and water flow must not be triggered until the nozzle is well inside the tank; a second operator is needed to control the water flow through the lance.


Ideally, the lance should only be triggered when the nozzle is in position and separated from the operator by at least one baffle. The water, sludge, and fuel that is rinsed off will typically drain back to a low area under the access hatch and can be continually pumped out while the powerwashing is in process. Protective equipment during this sort of powerwashing includes heavy rubber gloves, a raincoat, and face shield. Although caution will keep the power washing nozzle in the tank while the water is on, high-pressure water can cause extremely nasty injuries. The following link describes possible hazards using more powerful equipment, but the illustration is valuable.


Disposal. The marina’s used oil collection tank should be able to accept the contaminated fuel heel; contamination with polymerization sludge or biological fouling will not present any problems for the used oil recycler. Contamination with gasoline or solvents is not acceptable. For additional information, contact the National Oil Recyclers Association. Oily water is a problem for recyclers, so try to minimize the volume.


Please notice that most of these suggestions focus on safety. Cleaning out a fuel tank is no complicated trick with the proper tools. Doing so safely and efficiently requires thought and preparation.

DIY Diesel Tank Cleaning - Inside Practical Sailor Blog Article
__________________

__________________
Sean

If Ain't a Newell, It Ain't Wurt Oonin!
NewellCrazy is offline   Reply With Quote
Old 04-14-2013, 10:30 PM   #3
speedingsport
Senior Member
 
speedingsport's Avatar
 
Join Date: Jan 2012
Posts: 541
Default

Sean's at it again! Good information Sean! Thanks for sharing.
speedingsport is offline   Reply With Quote
Old 04-15-2013, 02:11 AM   #4
Newellin Thunder
Senior Member
 
Newellin Thunder's Avatar
 
Join Date: Aug 2012
Posts: 130
Default

I would swish it out with alcohol. Dissolves in both water and gas, breaks the surface tension of any remaining water so that it will evaporate well.
__________________
Ernest Jenkins

2005 Newell Thunder
Shakin the open road!
Newellin Thunder is offline   Reply With Quote
Old 04-15-2013, 03:44 AM   #5
Vantare
Member
 
Vantare's Avatar
 
Join Date: Dec 2012
Location: West Fargo, ND
Posts: 48
Default

Can you please elaborate on your post. What indications did you have of a problem? Why did you feel the tank needed cleaned?

Vantare
__________________
1959 Corvette Convertible

Cannondale Slice 5 Bike

2006 Prevost Vantare’ Double Slide

Steve & Annie
Vantare is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Using Lucas Injector Cleaner Archie T. Hogan Major Mechanicals 4 11-06-2012 04:18 PM
Motorhome caught fire in Walmart parking lot and a Prevost received extensive damage jWolfe RVing Safely 2 10-28-2012 04:54 PM
Thousand Trails sale, good deal? folivier Life on the Road | Livin' in Luxury 11 06-03-2012 01:48 PM
defrosters encantotom HVAC 0 04-25-2008 05:55 PM
heating sytem jeff HVAC 0 04-05-2006 10:37 PM

» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by Newell Coach Corporation or any of its affiliates. This is an independent, unofficial site.


All times are GMT. The time now is 09:50 AM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
×