|
11-28-2012, 12:13 AM
|
#1
|
Senior Member
Join Date: Oct 2008
Posts: 156
|
Sometimes generator won't crank from inside
Sometimes when trying to crank the generator from the inside toggle switches it will spin over fine but not crank. I can open the genny door and hold the fuel solenoid open with my hand and it fires right up and runs fine. I've replaced the relay but it sometimes still does it. What is supposed to trigger the solenoid to open once it's spinning over?
__________________
__________________
Jimmy and Debbie Daniel
1991 43' 6" Newell coach 279
San Antonio show coach
|
|
|
12-11-2012, 02:46 PM
|
#2
|
Senior Member
Join Date: Oct 2008
Posts: 156
|
Fixed it. Plug going into the relay was loose. Put some of the electrical grease on it, tighter it up and plugged it in. Works fine now.
__________________
__________________
Jimmy and Debbie Daniel
1991 43' 6" Newell coach 279
San Antonio show coach
|
|
|
12-11-2012, 11:40 PM
|
#3
|
Member
Join Date: Jun 2011
Posts: 11
|
Quote:
Originally Posted by jdaniel
Fixed it. Plug going into the relay was loose. Put some of the electrical grease on it, tighter it up and plugged it in. Works fine now.
|
Jimmy - is that dielectric grease you use or some other type - brand name please?
|
|
|
12-13-2012, 03:17 AM
|
#4
|
Senior Member
Join Date: Oct 2008
Posts: 156
|
I'm not sure. It came from NAPA. Cranks fine now. I got that tip from somebody on here a while back but never did it until now.
__________________
Jimmy and Debbie Daniel
1991 43' 6" Newell coach 279
San Antonio show coach
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
All times are GMT. The time now is 11:28 AM.