A
333 6/21/2001 1:58:41 PM 7/2/2001 Carl Tesch ctesch@dailypost.com vaccuum venturi assembly Thanks for your answers. Here is a post script: After trying two new valves which acted the same as the original, i concluded that the valve was manufactured incorrectly. I carefully pried the conver from the valve, cut about 1/2 inch from the spring and reassembled the valve using RTV as sealant. The valve now works correctly. It exhausts air as it is building a vacuum in the reservoir. When the vacuum reaches about 18 in. Hg. the valve shuts off and no more air is exhausted. It will remain in the shut off positon until the heater controls are operated. Vacuum is used by the blend door motors and then the valve goes into action and generates vacuum.
If anyone is interested in this repair, I am willing to share my information.
__________________
Ken
Previous Owner of 3 Newell's
Wanted: Newell Coach Needing Engine Replacement!
If you want to sell, PM or Private Message me. Thanks!
"I know I知 not perfect, and I don't live to be. But before you start pointing fingers, make sure your hands are clean."
-Bob Marley
|
Threaded Mode
