Tag axle switch
The wiring on my leveling system was all messed up when I bought it. I am trying to figure out the wiring schematic for the tag switch. It appears that current from the switch activates the lowering valves on both axles (they are wired together) and a seperate air valve blocks the air supply to the tag manifold. I cannot see how this would work unless there is a diode installed in the harness to prevent the main axle lower air valves from opening. Can somebody help me by explaining how yours works. I have talked to Newell ...they have sent schematics to me but the tag axle is not included and the wire colors on their sheet are not the same as mine...I have had to trace each one out....It seems to be leveling properly now.
__________________
1993 Newell 45'#316, 1976 Trans Am 455, 1967 GTO, 1953 Chevrolet 3105 (panel truck),1952 Chevrolet 3600,1969 Airstream Overlander. Always fixing something!
|
Threaded Mode
