|
04-08-2012, 07:28 PM
|
#1
|
Member
Join Date: Sep 2008
Location: Elk Grove, CA
Posts: 91
|
Removal of Carpeted Panel at Driver Position
I need to remove the vertical carpeted panel beneath the steering wheel. The panel has a slot cut in it for the brake pedal arm. Per chance, is it held in place similarly to the panel on the passenger side behind which are a number of 12 volt fuses (that I can get off)? I just purchased a VMSPC and it seems like behind this panel will be the best place to mount the unit.
__________________
__________________
Tim and Laura
2000, 45', Single Slide
Coach 541
|
|
|
04-08-2012, 08:08 PM
|
#2
|
Senior Member
Join Date: Feb 2010
Posts: 433
|
Tim,
That panel has a small clip at the bottom & a detent ball clip on top. Put your fingers over the top & pull toward yourself. You will hear the detent ball release. Now work it up and back toward yourself & remove. Reassemble in reverse.
__________________
__________________
Steve
Newell
|
|
|
04-08-2012, 08:34 PM
|
#3
|
Senior Member
Join Date: Jan 2010
Posts: 346
|
Tim,
Steve did a great job of describing how to remove the panel.
I would be interested in pictures of how you chose to layout the screen and where you mounted the display if you have the time to do that.
Thanks,
Russ
|
|
|
04-09-2012, 12:55 AM
|
#4
|
Member
Join Date: Sep 2008
Location: Elk Grove, CA
Posts: 91
|
Thanks rheavn, I will give it a try sometime this week. Russ, I plan on preparing a post once I get the install done. It will show what you are asking about. Likely will happen within a month although everything I do on this rig seems to take longer than I estimate.
__________________
Tim and Laura
2000, 45', Single Slide
Coach 541
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
All times are GMT. The time now is 06:49 AM.