|
08-09-2012, 05:51 AM
|
#1
|
New Member
Join Date: Oct 2007
Location: Reno, NV
Posts: 2
|
Allison HT 740 shifting rough
Hi there,
Just recently my tranny started shifting a little rough, before it started out as just a little nudge but then now seems to be “nudging” through every gear... I did a fluid change and checked all the seals but still doesn’t seem to smooth it out at all.. I could really use the help in doing it myself so I don’t have to take it in somewhere to get it fixed and get charged an arm or a leg… Thx for any suggestion
__________________
|
|
|
08-09-2012, 06:20 AM
|
#2
|
Senior Member
Join Date: Feb 2006
Location: Texas
Posts: 1,558
|
Do you have the air shifter or the cable linkage? If you have the air shifter, you might check the air pressure to the shifter. I have not had to have any major work done on mine other than have the air shifter rebuilt. Newell did that for me and there is a gentleman in northeast Texas that is expert at rebuilding the air shifters.
__________________
|
|
|
08-10-2012, 01:55 AM
|
#3
|
New Member
Join Date: Oct 2007
Location: Reno, NV
Posts: 2
|
Actually I have the cable linkage.... I spoke with a mechanic over the phone who is familiar with the Allison and has worked on quit a few, coming from him.... He had told me to "Just have a fresh set of proper springs installed and should be fine"... does this sound about right? Thx
|
|
|
|
Thread Tools |
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
No Threads to Display.
|
|
All times are GMT. The time now is 09:07 PM.