|
|
01-21-2009, 04:55 AM
|
#21
|
Senior Member
Join Date: Mar 2007
Location: mesa, az
Posts: 1,375
|
a few things for people to be aware of. the check valve on my 120v compressor was bad and my compressor made too much noise. i got my db meter out and it was 15 db louder than michales. so i got a new compressor from grainer, got a new pressure switch, new fittings, check valve and tubing.
the check valve was no good at all, and that would cause some leaking. they get moister and get corroded inside and allow the air pressure to leak out. something to keep in mind.
i also made a portable pressure gauge. i got a air pressure gauge, put a fitting and male quick connect fitting that i can plug into the port in the compressor compartment to see without going to the back of the coach or to the dash to see the pressure the compressor is cutting in and out with.
later
tom
__________________
|
|
|
01-21-2009, 06:06 PM
|
#22
|
Senior Member
Join Date: May 2006
Location: Houma, LA
Posts: 886
|
Hey Tom,
I just had my 120v air compressor check valve changed @ Newell because it was not allowing air to be pumped into the system. The unit would run, but no air would come out. It works fine now with the new valve. I didn't know that a check valve could get stuck in the closed position; I guess anything can happen.
Just for grins, what did a new 120v air compressor from Grainger's cost? The one I have is made by FAST.
__________________
__________________
Tuga & Karen Gaidry
1999 Newell 45 w/2 slides
Coach #512
2005 Pilot
|
|
|
01-21-2009, 09:16 PM
|
#23
|
Senior Member
Join Date: Mar 2007
Location: mesa, az
Posts: 1,375
|
howdy,
the compressor is a GAST, and was 480 dollars. i tried to negotiate them down, but they told me they were making less than ten bucks on it....who knows....
later
tom
__________________
|
|
|
|
|
Thread Tools |
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
No Threads to Display.
|
|
All times are GMT. The time now is 11:40 AM.